What we move
- Chemical fume hoods
- Biosafety cabinets (BSC)
- Laminar flow cabinets
- PCR hoods
- Under-hood safety cabinets
- Benches and epoxy work surfaces
Our process
- 01Disconnection
Facilities or the HVAC contractor disconnects exhaust, gas and power. We confirm the hood has been cleaned and emptied.
- 02Controlled dismantling
We separate the hood from its base and safety cabinet, secure the sliding sash and protect the filters.
- 03Through the building
Doorways and elevators are measured in advance; flat carts and lifting gear are used, and walls and frames protected.
- 04Transport and placement
Upright loading with tie-down, precise placement and reassembly on the base, ready for the contractor to reconnect.
Why not every mover can move a fume hood
A fume hood is heavy, asymmetric and top-heavy. Tilting it the wrong way can crack the glass, bend the exhaust frame or damage the filters of a biosafety cabinet. The route also has to be checked: doors, corridors and the elevator. We measure the route before moving day, not halfway through it.
Biosafety cabinets after a move
A BSC must be recertified after it is moved. Book a qualified certifier for the new site in advance, and we will time the placement to their schedule.
Common questions about fume hood moving
Do you disconnect the hood from the exhaust?
Exhaust, gas and power are disconnected and reconnected by the HVAC contractor or facilities team. We handle mechanical dismantling, transport and placement.
Can a fume hood go in an elevator?
Sometimes. We measure the elevator and openings in advance. When it will not fit, we use a crane through a window or balcony.
Does it need testing after the move?
A biosafety cabinet almost always does. For a chemical hood it is recommended to check face velocity after reconnection.
How many hoods can you move in a day?
Usually several, depending on the route in the building and whether a crane is needed.